FAAC B614 - Manual Operation; Release Procedure; Operation Restoration

53
B614 59 732998 - Rev.A

1

2
Translation of the original instructions
ENGLISH
13.3 MANUAL OPERATION
!
- Performing the release manoeuvre when there is
no electrical power.
- Performing the release manoeuvre only when the
beam is at a standstill.
- During manual handling, accompany the beam
slowly for the entire stroke. Do not let the beam
travel freely.
- Do not leave the barrier unblocked: after carrying
out the manual movement, restore automatic
operation.
RELEASE PROCEDURE
1. 53 Open the lock cover. Insert the key and
turn it once anticlockwise until it stops (1).
2. Move the barrier manually.
3. Restore the operation.
OPERATION RESTORATION
1. 53 Insert the key and turn it twice
clockwise until it stops (2).
2. Check that manual movement is inhibited.
3. Remove the key and close the cover.

