Need help?Do you have a question about the FAAC E024S and is the answer not in the manual?
General| Motor Output Voltage | 24V DC |
|---|---|
| Operating Temperature | -20°C to +55°C |
| Housing | ABS |
| Power Supply | 230 Vac ± 10% 50/60 Hz |
| Outputs | 2 |
Details the electrical box, its dimensions, and mounting options.
Important safety precautions for the control unit operation.
Diagram and explanation of control unit connections and components.
Safety warnings specific to the E024S unit when installed on the 391 model.
Connection layout for the E024S unit when fitted on the 391 system.
Details the function of each component on the control board.
Explains the purpose of each terminal and its connected device.
How the electronic anti-crushing function operates to ensure safety.
Instructions for selecting and programming the control logic.
Checking the status of input LEDs on the control board.
Settings for force and motor type using DIP switches.
Procedure for setting up the automated system's time learning.
Procedure to restore the control board to its factory default settings.
Defines various operational parameters like Anti-wind and Soft-touch.
Instructions for setting up and addressing BUS photocells.
Procedure for adding and saving BUS accessories to the system.
How to store DS radio control codes for opening A or B.
Storing SLH/SLH LR radio control codes for opening A or B.
Procedure for storing RC/LC radio control codes.
How to delete all stored radio control codes.
Details on installing an optional battery kit for E024S on 391.
To Next Page
