FAAC E024S - Page 14

E024S 14 732642 - Rev. F
DL1
DL2
DL3
DL1
DL2
DL3
Fig.8
If necessary, swap the 2 connecting wires to obtain the correct coupling of the encoder with the leaf as
indicated in the following figure.
LED ON FLASHING OFF
DL 1
PowersupplyonandBUSconnected
toboard
PowersupplyonbutBUSnot
connected
NopowersupplyorBUS
communication
DL 2 Leaf1encoder -- Leaf2encoder
DL 3 -- Pulsereadingduringleafmovement --
ENGLISH