12
EN
1.1 - UNPACKING
Ondeliveryofthecutter,checkthatthe
packaging is integral. If this is not the
case, inform the carrier or area agent
immediately.
Operateasfollowstoremovethepack-
agingfromthecutter:
• Cutandremovetheplasticbands.
• Open the box and take out the
instructionbooklet.
• Proceedasdescribedhereafter.
- Remove the protective card-
board covers from inside the
box.
- Liftthemachinewithgreatcare
andplaceonasolidsurface.
- Remove the transparent bag
wrappingthecutter.
Checkthatall componentsspec-
ifiedinthe deliverynoteandthis
instruction booklet are present
andfullyintact.
•
Shouldanyfaultsbenoted,suchas:
- dentstotheframeorguards;
- controlsthatareeithernotworking
orbroken;
- missingitemsorotherproblems;
pleaseadvisethecourier,manufacturer
andservicecentreimmediately.
-
Carefully dispose of packaging com-
ponents (bands, cardboard, polysty-
rene,polythenebags,etc.)asreport-
edbelowandinaccordancewiththe
standardsofthe
diseguitoedinot-
temperanzaallenormedelCountry
ofuse.
PACKING
This product complied with Directive 2002/19/UE.
Thecrossed outwheeled binsymbolon equipmentindicates thatitmust betreated separately
fromhouseholdwasteattheendofitsworkinglifeandthereforetakentoarecyclingfacilityfor
electricalandelectronicequipmentorhandedovertotheresellerwhenpurchasingnewequipment
ofthesametype.
Theuserisresponsibleforconsigningtheequipmenttoappropriatecollectionfacilitiesattheend
ofitsworkinglifeorfacethepenaltiesprovidedforbycurrentwastemanagementlegislation.
Separate collection for subsequent delivery of waste equipment to environmentally-compatible
recycling,treatmentanddisposalfacilitiestopreventpossiblenegativeimpactsontheenvironment
andhumanhealthwhilstencouragingrecyclingoftheproduct’scomponents.
Forfurtherinformationregardingtheavailablecollectionfacilities,pleasecontactyourlocalrefuse
collectionserviceortheshopinwhichthepurchasewasmade.
Manufacturers and/or importers fulfil their obligations concerning environmentally-compatible
recycling,treatmentanddisposaleitherdirectlyorbyjoiningacollectivescheme.
GUIDE TO THE TREATMENT OF WASTE EQUIPMENT