Fac C3 - General Warnings

4
GENERAL WARNINGS
EN
Meaning of warning signs found in booklet
DANGER: Indicates an imminently hazardous situation
which, if not avoided, could result in serious injury
or even death. The use of this term is limited to the
most extreme situations.
ATTENTION: Indicates a potentially hazardous situation
which, if not avoided, could result in serious injury
(and in extreme cases death).
WARNING: Indicates a potentially hazardous situation
which, if not avoided, may result in minor injuries
to personnel or damage to equipment. It also alerts
the user on incorrect operating modes.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Safety warnings
indispensable before use
 Carefullyreadthewarningscontainedhereinsincethey
provideimportantinformationregardingsafeinstallation,
useandmaintenanceoftheCUTTERC3-C5-C8machines.
Thepurposeofthispubblication,simplydened‘manual’below,isto
allowtheuser,especiallytothedirectoperatortotakeeverymeasure
andtoprepareallthenecessaryhumanandmaterialresourcesfor
asafeanddurableuseofthe.ThisbookletMUSTbekeptforallthe
slicerlifetimeandincaseofneed(example:damagetamperising
evenpartiallyitsconsultation,etc.)theusermustaskforanewcopy
tothemanufacturer.
☞