Fac C3 - Nameplates and Conformity Markings

13
Fabbrica Affettatrici Cavaria
FAC S.r.l.
MACCHINE AFFETTATRICI
INDUSTRIALI E FAMILIARI
Via Morazzone, 137 - 21044 CAVARIA (VA)
Tel. +39 0331 212252 - Fax +39 0331 216443
www.slicers.it
info@slicers.it
CUTTER
C3 - C5 - C8
START
S
T
O
P
100% MADE IN ITALY 100%
Istruzioni per l’uso e la manutenzione
IT
PER USO DOMESTICO
E PROFESSIONALE
Fig. 1
EN
Thepackingcomponents( bands , card-
board , polystyrene , etc.) are products
assimilabletotheurbansolidrefusals.
NAMEPLATES - CONFORMITY MARKINGS
The device described in this manual is
producedinaccordancewiththedirectives
inforce,asamended.Allcomponentparts
are adapted to the requirements of the
DirectiveandtheCEmarktestifiyingthe
compliance.
The plate with the manufacturer’s
identication, the machine technical
dataandtheCEmarking,isafxedto
thebaseofthecutter(gure2).
DO NOT DUMP
PACKAGING! DISPOSE OF
WASTE RESPONSIBLY!
☞
The plate must never be re-
moved and must always be
legible.
In case of wear or dam-
age the user is required
to replace it.