The LDAP tab is separated into three areas, Groups, Users and Settings. Each
column and function of each is as follows:
Show
Connection to specific groups that exist on the LDAP or Active Directory (AD) server
can be configured. Once a connection with an LDAP/AD server has been established,
these groups will be displayed under Groups. If multiple groups are listed from the
LDAP/AD server, selecting the box under the Show column will only display that
group of users to the right under the Users area.
Group
The Group column displays the existing group name that located on the LDAP/AD
server.
Permission
This column lists the permissions of an existing TerraBlock user to be applied to an
LDAP/AD user when “Sync” is performed.
Name
This lists the display name of the user provided by the LDAP/AD server. This most
commonly will match the Common Name.
Login Name
The lists the LDAP/AD Users login for the domain provided by the LDAP/AD server.
The Login Name is what is used to create the TerraBlock user when Sync is
performed. If the User Login Name contains spaces, an “_” will be added
automatically when Synced and will be displayed for the new TerraBlock User.re
Status
This will list the current status of users displayed. If the user exists on the LDAP/AD
server but not the TerraBlock, it will show as ‘Missing in TerraBlock’, visa versa with
show ‘Missing in LDAP’. If the user exists in both areas but volume permissions have
been changed, ‘Changes: +0 -1’ will be displayed. Synchronized displays after
successful sync between servers. Please see ‘Creating and Managing Users’ later in
this guide.
LDAP Tab - Button Functions
Show users in TerraBlock Server
Selecting this in the Settings area will display existing TerraBlock users in the Users
area.
Show users in LDAP
Selecting this in the Settings area will display existing LDAP users in the Users area.
Only show unsynced users
Users that have not been synced between the TerraBlock and LDAP servers will be
the only users display when this is selected.
Name
This lists the display name of the user provided by the LDAP/AD server. This most
commonly will match the Common Name.
To Next Page
Loading...
