Faema E92 Elite - DIP-Switch and Display Settings

221
Regolazioni - Setting - Reglages - Einstellungen - Regulaciones - Regulações
DIP-SWITCH CPU
Attenzione!
Il cambiamento di posizione dei Dip-Switch deve essere effettuato
RIGOROSAMENTE a macchina SPENTA.
Nelle condizioni standard il Dip-Switch 8 = ON.
Estrarre il cassetto elettrico operando come indicato nel capitolo
"SMONTAGGIO".
Agendo sui Dip-Switch (D) si attivano le seguenti funzioni:
- DIP 1 = OFF - ON inserimento dati standard (*)
- DIP 2 = OFF
- DIP 3 = OFF - ON simulazione chiave tecnico
- DIP 4 = OFF - ON contabilità
- DIP 5 = OFF - ON abilita sequenza tasti per ingresso in
programmazione
- DIP 6 = OFF
- DIP 7 = OFF
- DIP 8 = ON
(*) Al termine delle operazioni di inserimento dati standard, riportare il DIP
1 sulla posizione OFF.
CPU DIP-SWITCH
CAUTION!
When changing the position of the Dip-Switch, the machine MUST
BE SWITCHED OFF.
Under standard conditions, the dip-switch 8 = ON.
Remove the electric drawer as indicated in the chapter
“DISASSEMBLY”.
The dip-switches (D) have the following functions:
- DIP 1 = OFF - ON Input of standard data (*)
- DIP 2 = OFF
- DIP 3 = OFF - ON Simulation of engineer’s key
- DIP 4 = OFF - ON Bookkeeping
- DIP 5 = OFF - ON allows keys sequence to enter programming
- DIP 6 = OFF
- DIP 7 = OFF
- DIP 8 = ON
(*) Upon completion of the standard data input operations, position DIP
1 to OFF again.
DIP-SWITCH CPU
Attention !
Le changement de position des Dip-Switch doit être RIGOUREUSEMENT
effectué lorsque la machine est ETEINTE.
En phase de standard, le Dip-Switch 8 = ON.
Enlever le tiroir électrique en suivant les instructions reportées au chapitre
“DEMONTAGE”.
Utiliser les Dip-Switch (D) pour activer les fonctions suivante:
- DIP 1 = OFF - ON introduction informations standard (*)
- DIP 2 = OFF
- DIP 3 = OFF - ON simulation clef technique
- DIP 4 = OFF - ON comptabilité
- DIP 5 = OFF - ON habilite la séquence de touches pour entrer en
programmation
- DIP 6 = OFF
- DIP 7 = OFF
- DIP 8 = ON
jOD¿QGHVRSpUDWLRQVG¶LQWURGXFWLRQGHVLQIRUPDWLRQVVWDQGDUGUHPHWWUH
le DIP 1 sur la position OFF.
DIP-SWITCH-SCHALTER CPU
Achtung:
Die Verstellung der Dip-Switch-Schalter darf nur bei ABGESCHALTETER
Maschine vorgenommen werden!
Bei normalen Betriebsbedingungen: Dip-Switch-Schalter 8 = ON.
Ziehen Sie den Einschub der elektrischen Baugruppen aus dem Gerät,
indem Sie wie im Kapitel ‘DEMONTAGE’ beschrieben vorgehen.
Nachstehend werden die Funktionen bei entsprechender Einstellung der
Dip-Switch-Schalter (D) aufgeführt:
- DIP 1 = OFF - ON Eingabe Standarddaten (*)
- DIP 2 = OFF
- DIP 3 = OFF - ON Simulation Monteurschlüssel
- DIP 4 = OFF - ON Buchführung
- DIP 5 = OFF - ON ermächtigen Sie die Anschlagsequenz,
um in Programmierung hineinzugehen
- DIP 6 = OFF
- DIP 7 = OFF
- DIP 8 = ON
(*) Nach Abschluß der Eingabe der Standarddaten muß der Dip-Switch-
Schalter 1 auf OFF zurückgestellt werden.
DIP-SWITCH CPU
¡Atención!
El cambio de posición de los Dip-switch (O) se tiene que efectuar
RIGUROSAMENTE con la máquina APAGADA.
En condiciones estándares el Dip-switch 8 = ON.
4XLWDUODFDMDHOpFWULFDFRPRVHKDLQGLFDGRHQHO DSDUWDGR
“DESMONTAJE”.
Por medio de los Dip-Switch (D) se activan las siguientes
funciones:
- DIP 1 = OFF - ON introducción datos estándares (*)
- DIP 2 = OFF
- DIP 3 = OFF - ON simulación llave técnico
- DIP 4 = OFF - ON contabilidad
- DIP 5 = OFF - ON habilita la secuencia de teclas para entrar
en programación
- DIP 6 = OFF
- DIP 7 = OFF
- DIP 8 = ON
$O ¿QDO GH ODV RSHUDFLRQHV GH LQWURGXFFLyQ GDWRV HVWiQGDUHV
restablecer el DIP 1 a la posición OFF.
DIP-SWITCH CPU
Atenção!
A mudança de posição dos Dip-Switch deverá ser efectuada
RIGOROSAMENTE com a máquina DESLIGADA.
Nas condições standard o Dip-Switch 8 = ON.
([WUDLUDJDYHWDHOpFWULFDDFWXDQGRFRQIRUPHLQGLFDGRQRFDStWXOR
"DESMONTAGEM".
Actuando nos Dip-Switch (D) activam-se as funções a seguir
indicadas:
- DIP 1 = OFF - ON introdução dados standard (*)
- DIP 2 = OFF
- DIP 3 = OFF - ON simulação chave técnico
- DIP 4 = OFF - ON contabilidade
',3  2))21KDELOLWDDVHTXrQFLDGDVWHFODVSDUD
entrar em programação
- DIP 6 = OFF
- DIP 7 = OFF
- DIP 8 = ON
1R¿PGDVRSHUDo}HVGHLQWURGXomRGRVGDGRVVWDQGDUGUHFRORFDU
o DIP 1 na posição OFF.
D
I
GB
F
E
D
P