EasyManua.ls Logo

Faema FAEMINA - Hot Water Dispensing; Standby; Power-Saving Mode

Faema FAEMINA
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
1 2
194.0°F
* * * * * * * * * *
STANDBY
2
* * * * * * * * * *
94.0°
194.0°F
1 2
60''
English
Hot water dispensing
Scaldinghazard!
Warning: perform the operations with the greatest care Use the appropriate insulating devices to
movethewaterandsteamnozzles.
Whenthe desired doseis obtained, press the button
againtostophotwaterdispensing.
Positionacontainerinlinewiththehotwatertubeand
pressthedispensingbutton.
Power-saving mode
Whenthemachineisunusedfor60seconds,
thedisplaygoesblank.
To resumenormal operation,press any key:
thedisplaywillrestartanddispensingbegins
immediately.
Standby
Toresumeoperationofthemachine,pressthehot-water
buttonagainforafewsecondsuntilthedisplayrestarts.
Toaccessthefunction,holdthebuttondownfor3seconds
untilthecountdownnishesandthedisplayswitcheso󰀨.
Duringthestandbyphase,thebuttonLEDashes.
Thehot-waterbuttonhasasecondfunction,enablingthemachinetobeswitchedtostandby.
Placingthemachineintostandbymodecanalsobeconguredafterasetperiodoftimewithoutuse.Thiscanbeselected
fromthecustomerprogrammingmenu(CUSTOMERPROGRAMMING/CUSTOMERPARAMETERS/SERVICETIME/
STANDBY).
02_FAEMINA_USA.indd 1502_FAEMINA_USA.indd 15 26/09/2022 15:09:2426/09/2022 15:09:24

Related product manuals