Fagor AE-061 Service Manual

SERVICE MANUAL
ADVANCE OVENS
04/02/2020 105
will also be aborted.
To access this option the oven should be switched on but in STOP mode.
16.22. CONFIGURE SYSTEM
To access this option, the oven should be switched off.
Function to access system configuration, where the following sections can be configured:
- Language: Select required language.
o German
o Bulgarian
o Czech
o Croatian
o Danish
o Slovak
o Spanish
o Estonian
o Basque
o Finnish
o French
o Greek
o Dutch
o Hungarian
o English
o Italian
o Lithuanian
o Neutral
o Norwegian
o Polish
o Portuguese
o Romanian
o Russian
o Swedish
o Turkish
o Ukrainian
The language Neutral is the language in which the coded messages appear. These should be checked in the
Manual.
- Programme date and time: Programme actual date and time.
- Programme temperature scale: This allows selection of the temperature scale to be displayed, ºC (Celsius)
or ºF (Fahrenheit). The default setting is in ºC (Celsius).
- Programme Delta: This allows the value to be allocated to the DELTA function to be selected. This value is
used whenever working in DELTA mode. The Delta range is from 20 ÷ 80 ºC, with a default value of 50.
- Thermal Stop: This option allows the timer operation to be programmed, that is, when the countdown of a
timed operation begins. If Thermal Stop s activated, the oven does not start the countdown until the
appliance reaches the programmed temperature. On the other hand, if the Thermal Stop is NOT (default
option), the countdown starts as soon as the START/STOP button is pressed.
- HACCP Function where the oven operating values are stored The spike probe should always be used
 Start date and time
 Operating mode
 Function
 Humidity
 TC value
 TN value

Fagor AE-061 Specifications

General

Brand	Fagor
Model	AE-061
Category	Oven
Language	English