SERVICE MANUAL
ADVANCE OVENS
04/02/2020 144
CONSEQUENCE
The oven is completely disabled.
“E15 FAULT Q1” (Only gas ovens)
DESCRIPTION
Fault in the chamber ignition control
- SV gas is not activated.
- Not possible to unlock ignition control.
CONSEQUENCE
The oven is completely disabled.
“E16 BLOWER Q2” (Only gas ovens) (disabled)
DESCRIPTION
Steam blower error.
CONSEQUENCE
It is only possible to operate in Convection mode
“E17 BLOWERQ2” (Only gas ovens)
DESCRIPTION
Steam ignition control blocked. This error occurs after three failed ignition attempts.
CONSEQUENCE
It is only possible to operate in Convection mode
“E18 FAULTQ2” (Only gas ovens)
DESCRIPTION
Fault in the steam ignition control.
- SV gas is not activated.
- Not possible to unlock ignition control.
CONSEQUENCE
It is only possible to operate in Convection mode
“E22 CONTROL TEMP”
DESCRIPTION
NTC of controller exceeds 70 ºC
CONSEQUENCE
The oven is completely disabled.
“E23 FLUE PIPE” (disabled)
DESCRIPTION
Faulty flue pipe motor.
CONSEQUENCE
The oven is completely disabled
“E24 CHAM. CONNEX”
DESCRIPTION
Communication error. The chamber card does not respond.
CONSEQUENCE
The oven is completely disabled
“E25 PMD CONNEX”
DESCRIPTION
Communication error. The control holder card does not respond.
CONSEQUENCE
The oven is completely disabled
“E26 VAP CONNEX”
To Next Page
Loading...
Need help?
General