CNC 8055 / CNC 8055i
Page 27 of 106
NEW FEATURES
(SOFT M: 9.0X)
PLC mark "MACHMOVE" determines how the manual movements
with handwheels or with the keyboard will be carried out.
• "MACHMOVE"=0. The movements are referred to the Cartesian
axes.
• "MACHMOVE"=1. The movements in jog mode with handwheels
or with the keyboard are carried out on the incline axes of the
machine.
If the transformation is active, the displayed coordinates will be those
of the Cartesian system. Otherwise, the coordinates of the real axes
will be displayed.
To Next Page
Loading...
