Fagor CNC 8065 - Type of CAN Bus and Baudrate

Remote modules
CNC 8060
CNC 8065
8.
(REF: 1402)
·139·
CAN BUS (CANFAGOR/CANOPEN PROTOCOLS).
8.2 Type of CAN bus and baudrate.
Bus type selector: CANfagor / CANopen.
The CNC has two types CAN bus: CANfagor and CANopen. There are specific remote
modules for each type of bus; at the CNC and at the operator panels, the type of active CAN
bus must be selected.
Bus type selection at the CNC.
At the CNC, the type of CAN bus is selected by means of the machine parameters (parameter
CANMODE),