Fagor CNC 8065 - Numbering of the Analog Inputs and Outputs and of the Feedback Inputs

·44·
Remote modules
CNC 8060
CNC 8065
3.
(REF: 1402)
RIO70 REMOTE MODULES. (CANFAGOR PROTOCOL).
3.10 Numbering of the analog inputs and outputs and of the feedback
inputs.
The CNC numbers the modules automatically according to the
order of the remote groups (·ADDRESS· selector of the power
supply module). Within each group, they are ordered from top to
bottom and from left to right.
POWER SUPLY
Group ·1·
8 analog inputs.
4 analog inputs.
Example.
Group ·1·
(address = 1)
Group ·2·
(address = 2)
Analog inputs. 1 ·· 8 9 ·· 16
Analog outputs. 1 ·· 4 5 ·· 8
Group ·2·
8 analog inputs.
4 analog inputs.