Fagor CNC 8065 - Work Modes and Software Protection at the CNC

·58·
Remote modules
CNC 8060
CNC 8065
4.
(REF: 1402)
RIO5 REMOTE MODULES. (CANOPEN PROTOCOL).
4.4 Digital inputs and digital outputs (double module).
This module is used to expand the digital inputs and outputs (remote I/O). Each module has
48 digital inputs and 32 digital outputs.
DIGITAL IN/OUT
X5
X6
X7
X8
I13
I24
I1
I12
GND
O16
O9
+24V
GND
O8
O1
+24V
X1
X2
X3
X4
I13
I24
I1
I12
GND
O16
O9
+24V
GND
O8
O1
+24V
Digital inputs and digital outputs
(double module).
Connector ·X5·.
8 digital outputs.
Connector ·X6·.
8 digital outputs.
Connector ·X7·.
12 digital inputs.
Connector ·X8·.
12 digital inputs.
Connector ·X1·.
8 digital outputs.
Connector ·X2·.
8 digital outputs.
·X3· connector.
12 digital inputs.
Connector ·X4·.
12 digital inputs.