Hardware configuration
CNC 8065
4.
(REF: 1404)
·37·
CENTRAL UNIT ICU.
Ambient conditions.
• Relative humidity: 20-85% without condensation.
• Work temperature: 0-45 ºC with an average lower than 35 ºC.
• Storage temperature: Between -40 ºC ( 77 ºF) and +70 ºC (158 ºF).
• Maximum work altitude: Meets the IEC 1131-2 standard.
Degree of protection.
• Front panel: It meets the protection standard IP 65.
• Rear panel: It meets the protection standard IP 20.
The machine manufacturer must comply with the EN 60204-1 (IEC-204-1) regulation
regarding electrical shocks in case of defective input/output pins with external power supply
when not plugging the connector before turning the power supply on.
Do not get into the inside of the unit. This unit MUST NOT be opened by unauthorized personnel. Only
personnel authorized by Fagor Automation may manipulate the inside of this unit.
To Next Page
Loading...
