Fagor CNC 8065 - Elements (Connectors)

·90·
Hardware configuration
CNC 8065
8.
(REF: 1404)
OP-PANEL MODULE. OPERATOR PANEL WITH OR WITHOUT
SPINDLE SPEED OVERRIDE SELECTOR.
8.3 Elements (connectors).
The connectors are in the rear.
4
0
1
F
E
D
C
B
A
9
8
7
6
5
3
2
1234
ON
Ground connection.
Connectors overview.
CAN bus. ·CAN· connector.
CAN bus connection.
CANCANLT
SHIELD CAN H SHIELD CAN L ISO GND SHIELD CAN H SHIELD CAN L ISO GND
01
4
0
1
F
E
D
C
B
A
9
8
7
6
5
3
2
ADDRESS
0 V
24 V DC
HANDWHEEL
GND
MPG1-A
MPG1-B
MPG2-A
5 V DC
MPG3-B
MPG3-A
MPG2-B
1234
1234
ADD MSB
SPEED
CAN F/O
ON
CAN bus. ·ST· selector.
Switch to activate the line termination resistor of the CAN bus.
24 V DC voltage supply.
Voltage supply for the keyboard.
CAN bus. ·ADDRESS· selector.
Address (node) of the element within the CAN bus.
Detailed view of the connectors.
CAN bus. ·ADD MSB· selector and bus type.
Selector for the type of CAN bus, speed for CANopen bus and ·ADD
MSB· selector.
·HANDWHEEL· connector.
Handwheel connection.