Fagor CNC 8065 - Operator Panel (Only LCD-10 K)

·52·
Hardware configuration
CNC 8065
4.
(REF: 1404)
CENTRAL UNIT ICU.
4.4.4 Operator panel (only LCD-10K)
E36 Handwheel. Handwheel connection.
10-pin male Phoenix minicombicon contact (3.5 mm pitch).
The keyboard admits the connection of up to 3 handwheels (MPG1, MPG2 and MPG3) with
A and B signals (5 V DC TTL). If he handwheel has an axis selector button, the button signal
may be connected to a digital input and may be managed from the PLC using the
-NEXTMPGAXIS- mark.
E36 Handwheel.
Handwheel connection.
Rear view.
E36: Handwheel
Cable shields must be connected to the grounding plate of the
electrical cabinet.
Pin Signal Function
1 +5 V Power supply.
2- - -
3- - -
4 MPG3-B B signal of the third handwheel.
5 MPG3-A A signal of the third handwheel.
6 MPG2-B B signal of the second handwheel.
7 MPG2-A A signal of the second handwheel.
8 MPG1-B B signal of the first handwheel.
9 MPG1-A A signal of the first handwheel.
10 GND Power supply.
789 34561210
MPG2-B MPG2-A MPG1-B MPG1-A GND MPG3-B MPG3-A 5 V DC