Fagor CNC 8065 - Page 45

Hardware configuration
CNC 8065
4.
(REF: 1404)
·45·
CENTRAL UNIT ICU.
Ethernet.
8-pin RJ45 connector and 2 status LED's.
USB ports.
Type A USB double connector.
PC-compatible keyboard.
6-pin minidin female connector.
Mouse with PS-2 connector.
6-pin minidin female connector.
13245768
Pin. Signal.
1 TX+ (transmit data).
2 TX- (transmit data).
3 RX+ (receive data).
4- - -
5- - -
6 RX- (receive data).
7- - -
8- - -
LED. Meaning.
Green The LED turns on when the central unit is connected to
network.
Yellow The LED blinks when data is being transferred.
Pin. Signal.
1+ 5 V
2DT -
3DT +
4GND
4
2
3
1
4
2
3
1
No USB devices must be used nor connected while executing a part program. Using USB devices may
slow down the execution or cause some "RT-IT overflow" type error.
Pin. Signal.
1 Keyboard data.
2- - -
3GND
4+5 V
5 Keyboard clock.
6- - -
1
3
5
2
4
6
Pin. Signal.
1 Mouse data.
2- - -
3GND
4+5 V
5 Mouse clock.
6- - -
1
3
5
2
4
6