Hardware configuration
CNC 8065
5.
(REF: 1404)
·67·
LCD-15SVGA. PASSIVE MONITOR " LCD15-SVGA".
5 LCD-15SVGA. PASSIVE MONITOR " LCD15-SVGA".
The passive screen may be used to display the video signal coming from the ·VGA· connector
of the central unit and also interact with the central unit using softkeys. This screen may be
the only one connected to the central unit (for example, with the central unit MCU) or it may
be a second monitor (for example, with the central unit ICU). When the screen is used as
a second monitor, both monitors show the same video signal.
General characteristics.
Power supply. 24 Vdc universal power supply.
Connection. Connect the screen to the ·VGA· output and the softkeys to the
keyboard.
Degree of protection. The face plate meets the IP 65 protection standard and the rear the
IP 2X standard.
To Next Page
Loading...
