Fagor Compact Drives and Motors Quick Reference. Ref.1910 CQR-17/56
Rotary connectors
Note that both the power connector and the feedback connector are
rotary making it easier to connect the cable when the installation so
requires. The possible rotating angles are:
CHARACTERISTICS GRAPHS AT 400 V AC
FKM21.60A
FKM22.30A
FKM22.50A
FKM22.60A
FKM42.30A
MANDATORY. The indicated rotating angle values must be
exceeded. We recommend to rotate both connectors only
when necessary and not too often. The more times they are
rotated, the torque necessary to rotate them will
decrease.They must not be forced permanently.
WARNING. Note that the corresponding cable must be
installed on each connector. Remember that each cable has
a specific flexibility and, therefore, when handling the
connector with the cable installed, its maximum bending
radius must not be exceeded.
CONNECTOR MOTOR Amax Hmax
POWER ·1· FKM 150° 180°
SIGNAL ·2·
FKM2 150° 180°
FKM4 115° 110°
FKM6 110° 105°
Note.
Certain positions cannot be
reached by rotating with the based
mounted.
Approx. max. rotating torque, 8 N·m.
Only 5 rotations are allowed in order
to keep the degree of protection.
(1)
(2)
CONNECTOR MOTOR Amax. Hmax.
POWER ·1· FKM8 200° 110°
SIGNAL ·2· FKM8 110° 105°
(1)
(2)
(3)
FIXED
CONNECTOR MOTOR Amax Hmax
POWER ·1· FKM8/V 200° 110°
SIGNAL ·2·
FKM8/V
Keep it fixed in the
position shown in the image
FAN ·3· FKM8/V 110° 105°
Note.
Certain positions cannot be
reached by rotating with the based
mounted.
Approx. max. rotating torque, 8 N·m.
Only 5 rotations are allowed in order
to keep the degree of protection.
0
1
2
3
4
5
6
Nm
1/min
FKM21.60A
400V-15%
400V
0 1000 2000 3000 4000 5000
0
2
4
6
8
10
Nm
12
14
FKM22.30A
1/min
400V-15%
400V
400V-15%
400V
0
2
4
6
8
10
12
14
0 1000 2000 3000 4000 5000 6000 7000 8000
FKM22.50A
1/min
400V-15%
400V
0
2
4
6
8
10
12
14
0 1000 2000 3000 4000 5000 6000 7000 8000
9000
FKM22.60A
1/min
1000
0
2000 3000 4000 5000
1/min
5
0
10
15
20
25
FKM42.30A
400V-15%
400V
Nm
To Next Page
Loading...
