Fairlight SX-48 - Appendix A - Specifications

Service Manual APPENDIX A - SPECIFICATIONS July 24, 2008
SX-48 Page 31
Appendix A - Specifications
Analog Inputs and Outputs
Input impedance 10k Ohms
Output impedance <55 Ohms
Maximum input level +24dBu
Maximum output level +24dBu
Standard operating level adjustable from +14dBu to +24 dBu
Input signal to noise >113dB A-weighted (A/D conversion)
Output signal to noise >113dB A-weighted (D/A conversion)
Through system signal to noise >110dB A-weighted
Through system THD <0.001%
Bandwidth (.25dB) 20Hz to 20kHz
AES/EBU Inputs
Minimum differential 200mV
Input impedance 110 Ohms transformer isolated
Channel status insensitive to channel status
AES/EBU Outputs
Output level 4V
Output impedance 110 Ohms transformer isolated
Channel status professional, normal audio, source locked,
sample frequency locked to project sample
rate, stereophonic, 24-bit word length
Synchronization
System sample rates 44.1, 48, 88.2, 96kHz
Run-Up/Run-down sample rates 44.044, 44.056, 44.144, 47.952, 48.048,
95.904, 96.096kHz
SRC range (with optional SRC I/O
module)
Input:
0.33 to 3.0 x system sample rate with range
limits of 8kHz to 108kHz