Service Manual CHAPTER 6 - THE SX-48 CONFIGURATOR July 24, 2008
SX-48 Page 24
Upgrading Firmware.
It is highly recommended that all of your current SX-48s be upgraded to current firmware. The
upgrade is required for compatibility with Dream II and Xynergi software version 1.50!
Firmware Version
Click on the Firmware Version button to read the current firmware versions for any particular SX-48
unit chosen in the “drop-down” window.
You will see the following information displayed in the “info” window:
• Current SX-48 Firmware version
• Motherboard FPGA firmware version
• SX-48 Sync card FPGA firmware version
To program the firmware for the chosen SX-48, click on the Program Firmware Button. The SX-48
Configurator will automatically launch the “Network Download Utility” application for SX-48.
To Next Page
Loading...