7
2.8 PAN DETECTION
2.8.1 This prevents the zones being turned on without a pan being present. It also switches
the zone off as soon as a pan is removed.
Also if the pan is made from the wrong type of material for induction equipment the
digital display will read the no pan present symbol on the glass.
2.9 RESIDUAL HEAT DISPLAY
2.9.1 When the temperature of the hob exceeds 60 Degrees after removal of a pan the “H”
symbol will appear on the glass display, this indicates hot surface. When shown the
induction generator will engage its cooling fans. Do not switch off and allow cooling to
occur. When “H” Symbol disappears either continue operation or switch off.
2.10 DIGITAL DISPLAY CODES
Melt, Keep warm and simmer functions.
Power level settings (1-9)
Automatic heat up control.
Pan detection (no pan present).
Error codes for generator.
Error rotary control (lightning symbol).
2.11 USING THE OVEN
2.11.1 To use oven, turn temperature control knob clockwise to desired temperature Ensure
heat demand (amber) light illuminates.
2.11.2 When oven has reached temperature, the heat demand (amber) light will extinguish
the light will then illuminate and extinguish at regular intervals as the oven cycles.
To Next Page
Loading...
Need help?
General
