20
IMPORTANT: Use only the cables which are included with your wheel
base! Peripheral devices are not included and sold separately!
6.6 Connections
To connect additional peripheral devices like shifters,
pedals or handbrake to the Podium Wheel Base DD1
PS4
TM
there is a row of connector sockets at the rear
of the wheel base:
6.6.1 USB
The USB port is used to connect the Podium Racing Wheel F1® to PlayStation®4
or other platforms*.
IMPORTANT: Use only the included USB cable to avoid damage and/
or malfunction!
6.6.2 SHIFTER1
The SHIFTER1 port is used to connect H-pattern shifters to the Podium Racing
Wheel F1® (e.g. the ClubSport Shifter or the ClubSport Shifter SQ in H-pattern
mode.) Sequential shifters can also be connected to this port. Note: Sequential
shifters connected to this port can be mapped identically to the shifter paddles
at the ClubSport Steering Wheel F1® PS4™ or any other Fanatec
®
steering
wheels by PC* driver settings (see chapter ‘PC* driver’ of this user manual).
*PC compatibility not tested nor endorsed by Sony Interactive Entertainment Europe
To Next Page
Loading...
Need help?
General
