FANATEC PODIUM F1 User Manual

8
PLUG & PLAY
4
This chapter provides a quick summary for setup, and is not a replacement for
the chapters that follow; we strongly recommend reading the later chapters to
gain a full understanding of the product’s many features, and to achieve the
best user experience. Especially refer to chapter 10 ‘Troubleshooting’ to get
quick help if needed.
Position the locking ring until it touches the rubber
gasket, but do not tighten. This keeps the rubber
gasket in place during wheel rim attachment.
Centre the Quick Release shaft so the slot is at the
top.
Pull and hold the Quick Release sleeve and carefully push the steering wheel
onto the shaft. Release the sleeve.
When using the Fanatec ClubSport Quick Release on a Podium Wheel Base,
no bolt is required.

FANATEC PODIUM F1 Specifications

General

Brand	FANATEC
Model	PODIUM F1
Category	Video Game Controller
Language	English