FANATEC PODIUM F1 User Manual

43
TROUBLESHOOTING
10
The Podium Racing Wheel F1® must not be modied differently than described
in this manual. Endor® AG expressly prohibits analysis and utilisation of the
electronics, hardware, software and rmware contained in the controller. In
case difculties occur in connection with utilisation of the Podium Racing Wheel
F1®, please use the following guide for elimination of errors. On the website
www.fanatec.com/support you will nd further details and contact data.
If the Podium Racing Wheel F1® is not working properly:
Problem description Solution
After rmware update of the Podium Racing
Wheel F1® the steering wheel is not properly
centred.
After applying a rmware update on the Podium
Racing Wheel F1® the wheel centre position
must be manually calibrated. See chapter ‘Elec-
trical Operation ‘Wheel centre calibration’ of
this manual for more details.
After rmware update of the Podium Racing
Wheel F1® the H-pattern shifter is not working
properly.
After applying a rmware update on the Podium
Racing Wheel F1® the H-pattern shifter must
be manually calibrated. See chapter ‘Electrical
Operation’
‘Shifter Calibration Mode’ of this
manual for more details.
The driver window does not show the attached
steering wheel.
Make sure that you have updated your Podium
Racing Wheel F1® to the latest rmware version
which can be downloaded from
www.fanatec.com/support.
Check the pins inside the Quick Release of
the steering wheel, these must not be bent or
damaged.
Try to use another steering wheel. If this is also
not detected the Podium Racing Wheel F1®
might be damaged.
Clean only with a dry or slightly damp cloth. Using cleaning solutions may
damage your Podium Racing Wheel F1®.
CLEANING
9

FANATEC PODIUM F1 Specifications

General

Brand	FANATEC
Model	PODIUM F1
Category	Video Game Controller
Language	English