EasyManuals Logo

FANATEC PODIUM F1 User Manual

FANATEC PODIUM F1
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
34
There is also an ‘S_0’ setup that is locked to default settings.
7.3.2 SEN (Sensitivity)
SEN range: 90 … 1080 AUTO SEN default: AUTO
The sensitivity denes the steering angle. If SEN is set to 90 the steering wheel
can only be turned 90° (45° to left and 45° to right side direction from calibrated
centre position). If SEN is set to 1080 the steering wheel can be turned the
maximum lock of 1080° (540° to left and 540° to right side direction from
calibrated centre position). If SEN is set to AUTO the sensitivity is controlled by
the PC* driver (see chapter PC* driver for more details) or games can directly
support this feature.
7.3.3 FF (Force Feedback)
FF range: OFF 001 … 100 FF default: 35
The Force Feedback denes the maximum strength of the motor when force
feedback effects from software / games are sent to the Podium Racing Wheel
F1®. If FF is set to OFF, there will be no force feedback effect executed by the
Podium Racing Wheel F1® motor. If FF is set to 001, the motor will execute
only 1% of the maximum motor power. If FF is set to 100, the motor will execute
100% of the maximum motor power.
7.3.4 SHO (Shock)
SHO range: OFF 010 ... 100 SHO default: 100
The strength of the shock / vibration motors inside the Fanatec
®
steering wheel
can be adjusted from 100% to 0%. These vibration motors can be used by a
game directly (Fanatec
®
SDK) or by the ABS function.
7.3.5 ABS
ABS range: 000 … 100 OFF ABS default: OFF
This feature gives you a direct feedback based on your brake inputs. If you set
the value to 100 the vibration will start as soon as you give 100% brake input
to the game. If you set it to 95% the vibration will start if you push the brake to
95% or more. The ABS feature uses the vibration within your wheel rim (can be
turned off by setting SHO to “0”) AND the vibration motor on a CSP (V2 or V3)
pedal set if it is connected directly to the wheel - not individually by USB. ABS
can also be simulated dynamically by the game if the developer makes use of
*PC compatibility not tested nor endorsed by Sony Interactive Entertainment Europe

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the FANATEC PODIUM F1 and is the answer not in the manual?

FANATEC PODIUM F1 Specifications

General IconGeneral
BrandFANATEC
ModelPODIUM F1
CategoryVideo Game Controller
LanguageEnglish

Related product manuals