Fancom 743 5. Function keys
11
Start(ed)
The time at which blend preparation will start (
Start
) or has
Started
.
Blend
The blend the computer is preparing or going to prepare.
Amount
This readout depends on the set preparation program,
(
Program Prep. feed
):
REGISTER The value between brackets is always 0. This is followed by the
amount of feed already transported to the storage silo today.
DOSE The amount of feed the computer will prepare during this
preparation action is shown between brackets. This is followed
by the amount of feed already transported to the storage silo
during this preparation action.
DISTRIBUTE
The amount of feed the computer will prepare today is shown
between brackets. This is followed by the amount of feed
already transported to the storage silo today.
FEED CLOCK
FEED CLOCKFEED CLOCK
FEED CLOCK
Start(ed)
The time at which the connected feed system (e.g. a feed chain) should start
(
Start
) or has
Started
. This start time has been entered at function key
Feed clock
.
WATER CLOCK
WATER CLOCKWATER CLOCK
WATER CLOCK
Start(ed)
The time at which the watering system should start (
Start
) or has
Started
. This
start time has been entered at function key
Water clock
.
Amount
This readout depends on the set water program(
Program Water clock
):
REGISTER The value between brackets is always 0. This is followed by the
amount of water already given today (litres).
DOSE The amount of water the computer will give during this cycle is
shown between brackets. This is followed by the amount of
water already given during this cycle.
LIGHT CLOCK
LIGHT CLOCKLIGHT CLOCK
LIGHT CLOCK
Start(ed)
The time at which the light should activate (
Start
) or has activated (
Started)
.
This start time has been entered at function key
Light clock
.
Light level (%)
The light intensity in %.
TIME CLOCK
TIME CLOCKTIME CLOCK
TIME CLOCK
Start(ed)
The time at which the time clock should start (
Start
) or has
Started
. This start
time has been entered at function key
Time clock
.
To Next Page
Loading...
