Fancom 743 - Current Curve

Fancom 743 5. Function keys
20
5.7.4 Current curve
Readout of the selected curve values for this storage silo. The computer takes these values from
the feed curve table. The day number and corresponding amount per animal (kg and g) are
shown for 10 bending points (maximum). The computer calculated number of days and weeks
corresponding to this day number is shown between brackets.

Select the current curve at Select blend/curve  1. Select blend/curve  Curve. The
names CURVE.A, CURVE.B etc. can be changed at Feed curve table  Curve name.
>>Curr.CURVE A 1
Day Amnt.
1 ( 0.0) 0 0.000
2 ( 0.0) 0 0.000
3 ( 0.0) 0 0.000
4 ( 0.0) 0 0.000
5 ( 0.0) 0 0.000
6 ( 0.0) 0 0.000
7 ( 0.0) 0 0.000
8 ( 0.0) 0 0.000
9 ( 0.0) 0 0.000
10 ( 0.0) 0 0.000
3×