Fancom 743 - 5.7 Select blend;curve

Fancom 743 5. Function keys
18
5.7 Select blend/curve
5.7.1 Select blend/curve
Blend Select the blend the computer must prepare for this storage silo. A blend
selection must always be made.
Curve Select the curve table to be used for the current curve.
Blend day
See key for explanation
Curve p. anim. The feed amount the animal will be given today according to the curve.
Cost price The calculated blend cost price (on the current blend day).
Copy to all
storage silos?
Set to YES to copy all settings made for this storage silo to the other storage
silos.
5.7.2 Current blend
Readout of the blend composition selected in section 5.7.1. The percentage of the various
ingredients in this blend is shown. The computer takes these percentages from the blend
progress. The percentages can be corrected here.
1 Select blend/curve
2 Current blend
3 Offset blend
4 Current curve
>>Blend/curve 1
Blend BLEND A
Curve CURVE A
>
Blend day (00.0) 000
Curve p.anim. 00.000
Cost price 0.00
Copy to all
storage silos?
NO
>>Curr.BLEND A 1
1 START 0.0
2 GRAIN-I 0.0
3 GRAIN-II 0.0
4 FINISHER 0.0
5 WHEAT 0.0
6 MAIZE 0.0
7 SOYA 0.0
8 C.C.M. 0.0
9 PEAS 0.0
10 TAPIOCA 0.0
11 INGR. 11 0.0
12 INGR. 12 0.0