F&F LE-03MB - Pulse Output; Energy Setup; Pulse Rate

LE-03MB - User manual
15
5.2.3. Pulse output
Pulse output configuration no. 1.
5.2.3.1. Energy setup
The output can be set to provide a pulse for a definied amount of Energy active (kWh) or reactive
(kvarh).
From the setup menu, use and
buttons to select the pulse output option.
Press to enter the selection routine.
The unit symbol will be flash.
Use and buttons to choose kWh or
kvarh.
Press to confirm selection.
Press to return to the main set up menu.
5.2.3.2. Pulse rate
Setup value option kWh/kvarh per 1 pulse. Values: 0.01 / 0.1 / 110 / 100.
From the setup menu, use and
buttons to select the pulse rate option.