F&U FL40100 - Picture Menu

Press INFO button on the remote control to display program information.
1. Current Source
2. Current program number.
3. The NICAM mode of current program.
4. The sound system of current channel, could be changed on Analog
Manual Search menu.
PICTURE MENU
Press MENU button to display the main menu.
Press button to select Picture in the main menu, then press ENTER
button or button to enter.
1.Press button to select the option that you want to adjust in the
Picture menu, then press ENTER button or button to enter.
2.Press button to adjust or press button to select. and press
ENTER button or button to select the sub menu.
3.After finishing your adjustment, press MENU button to save and return back
to the previous menu, and press EXIT button to exit the entire menu.
Picture Mode
Press button to select Picture Mode, then press ENTER button or
button to enter press button to select. (Available Picture Modes: User,
Standard, Vivid, Soft)
You only can change the value of brightness, contrast, sharpness, color, when
the picture is in User mode
- 16 -