FangLing F2300(A/B) - Page 4

F2000 Series Shape Cutting Control System Operation and Installation Manual
iv
 Loose fitting clothing or ties may become entangled in the machinery. These
items should not be worn while operating the machine.
 This controller should only be operated by trained service person.
 Do not open the controller unless obtaining the authorization.
 Do not let any acid or alkalescency substance to corrode the controller.
High Voltages
 Electric shock can kill. Be sure this equipment is safely installed in accordance
with enclosed procedures and specifications.
 Avoid contact with electrical wires and cabling while power is on.
 Only trained person can operate this controller.