Maintenance
14
To Clean Your Fan:
To Clean Your Fan Blade:
CAUTION
Do not use water when cleaning your fan. It could
damage the motor or the finish and create the possibility
of electrical shock.
WARNING
To avoid possible fire or shock, be sure electricity is
turned off when you clean the ceiling fan. (Figure 1)
Figure 1
MAIN FUSE BOX
Figure 2
Grill
Figure 3
Blade
Allen Wrench
Figure 4
1. Remove the screws and carefully take off the grill
in the motor assembly. Retain the screws and the grill
for Step 3. (Figure 2)
Periodic cleaning of your new fan is the only maintenance
that is needed.
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the finish.
Abrasive cleaning agents are not required and should be
avoided to prevent damage to finish.
2. Carefully remove the screws and blade by allen
wrench and retain the screws. After cleaning and
reinstalling the blade using the removed screws.
(Figure 3)
3. Reassemble the grill to the motor assembly using
the removed screws. (Figure 4)
To Next Page
Loading...
Need help?
General
