Fanimation Palisade FP240 Series

Other manuals for Fanimation Palisade FP240 Series

Specification Sheet2 pages

Questions and Answers

L
Lisa SchmidtJul 30, 2025
Why is my Fanimation Fan not starting?
- W
  wweaverJul 30, 2025
  There are several reasons why your Fanimation Fan might not be starting: * A fuse or circuit breaker might be blown. Check both the main and branch circuit fuses or circuit breakers. * There might be loose power line connections to the fan, or loose switch wire connections in the switch housing. Inspect the line wire connections to the fan and switch wire connections in the switch housings, ensuring the main power is turned off before doing so. * There could be a loose connection at the motor assembly. Verify that the plug between the motor and horizontal tube assemblies is properly connected.
T
Tammy JacksonAug 19, 2025
How to fix a noisy Fanimation Fan?
- C
  Christopher WilliamsAug 19, 2025
  If your Fanimation Fan is making noise, here are a few things to check: * Make sure the blades are attached to the fan. * Check and tighten any loose screws in the motor housing. * Ensure the screws securing the fan blade holders to the motor flywheel are tight. * Verify wire connectors inside the housing aren't rattling against each other or the interior wall of the switch housing. Ensure the main power is turned off before checking. * If you're using a solid-state variable speed control, it may be causing motor noise. Consider using an alternative control method. * Tighten any loose screws holding the blades to the blade holders. * Securely tighten the rubber flywheel set screw if it is loose.
E
Emily HernandezNov 9, 2025
What to do if my Fanimation Fan wobbles excessively?
- J
  Joseph JonesNov 9, 2025
  If your Fanimation Fan wobbles excessively, consider the following: 1. Check and tighten the hanger bracket bolt holding the extension pole. 2. Tighten the bolts holding the connecting harness to the extension pole. 3. Ensure the screws securing the fan blade holders to the flywheel are tight. 4. Verify that the blade holders seat firmly and uniformly to the surface of the flywheel. If seated incorrectly, loosen and retighten the screws. 5. Confirm that the hanger bracket is rigidly secured to a structural member with the 5” lag bolt, ensuring it doesn't move. 6. Try interchanging an adjacent blade pair to redistribute the weight. You can also identify a heavy blade by turning off the fan and seeing if one blade quickly drops to the down position. Trade out this blade with an adjace...

Summary

Safety Precautions

Important Safety Instructions

Essential safety guidelines to prevent fire, shock, and personal injury during fan installation and use.

Additional Safety Instructions

Further safety measures concerning electrical connections, grounding, and product usage.

Electrical and Structural Requirements

Fan Alignment and Hanger Bracket Installation

Final Fan Assembly

Wiring and Control Options

How to Wire Your Ceiling Fan

Detailed steps for connecting fan wiring to house supply, grounding, and controls for safe operation.

C3 Wall Control Installation and Operation

Wiring the C3 Wall Control

Operating the C3 Wall Control

Canopy Housing Installation

Fan Blade Assembly

Attaching Blade Holders to Blades

Blade Attachment

Securing Blade Holders to Flywheel

Trouble Shooting

Fanimation Palisade FP240 Series Specifications

General

Category	Ceiling Fan
Blade Span	52 inches
Number of Blades	5
Motor Type	AC
Light Kit	Optional
Control Type	Pull chain
Mounting Type	Downrod
Control	Pull chain
Remote Control	Optional
Location	Indoor
Reversible Motor	Yes
Indoor/Outdoor Use	Indoor
Blade Material	Wood
Light Kit Included	No
Warranty	Limited lifetime
Downrod Length	Included
Motor Speed	3 Speed
Finish	Various finishes available