Fanvil PA2S User Manual

16
6.6 Set the player type
Set the player type (the default is panel speaker mode)
[Phone Settings] >> [Media Settings] >> [Media Settings]
The system defaults to the <panel speaker> mode, which is an intercom panel terminal with a
shell. In order to ensure the voice effect of hands-free intercom and avoid damage to the
speaker, When speaking, the output power is limited to less than 10W.
Picture 5- Speaker
If you need external speakers for broadcasting, you can adjust to the <external speakers>
mode:
At this time, you can select 10W/20W/30W according to the power of the external speaker. Note
that the corresponding power supply needs to be matched at this time:
Table 5- Power Supply
Output Power
Speaker type
POE
10W
10W/4 Ω
12V/2A DC
10W
10W/4Ω
18V/2A DC
20W
20W/4Ω
24V/2A DC
30W
30W/4Ω

Fanvil PA2S Specifications

General

Supported protocols	SIP v1 (RFC2543), v2 (RFC3261) over UDP/TCP/TLS RTP/RTCP/SRTP STUN DHCP IPv6 PPPoE L2TP OpenVPN SNTP FTP/TFTP HTTP/HTTPS TR-069
Full duplex	Yes
VPN support	L2TP / OpenVPN
Ethernet LAN data rates	10, 100 Mbit/s
WAN connection	Ethernet (RJ-45)
Headphone connectivity	3.5 mm
Ethernet LAN (RJ-45) ports	2
Package depth	58 mm
Package width	147 mm
Package height	114 mm
Operating temperature (T-T)	-30 - 60 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting type	Desktop/Wall mounting
Product color	Black
LED indicators	Network, Status
Enclosure material	Aluminum
Voice codecs	G.711a, G.711u, G.722, G.729A, G.729B, OPUS

Weight and Dimensions

Depth	28 mm
Width	113 mm
Height	83 mm