Fanvil PA2S User Manual

21
8 Advance Function
8.1 Intercom
The equipment can answer intercom calls automatically.
Picture 11 - WEB Intercom
Table 6- Intercom
Parameters
Description
Enable Intercom
When the intercom system is enabled, the device will accept
the SIP header call-info of the Call request
Command automatic call
Enable Intercom Barge
If the option is enabled, PA2S will answer the intercom call
automatically while it is in a normal call, and it will reject new
intercom call if there is already one intercome call
Enable Intercom Mute
Enable mute during intercom mode
Enable Intercom Ringing
If the incoming call is intercom call, the device plays the
intercom tone.
8.2 MCAST
This feature allows user to make some kind of broadcast call to people who are in multicast
group. User can configure a multicast DSS Key on the phone, which allows user to send a Real

Fanvil PA2S Specifications

General

Supported protocols	SIP v1 (RFC2543), v2 (RFC3261) over UDP/TCP/TLS RTP/RTCP/SRTP STUN DHCP IPv6 PPPoE L2TP OpenVPN SNTP FTP/TFTP HTTP/HTTPS TR-069
Full duplex	Yes
VPN support	L2TP / OpenVPN
Ethernet LAN data rates	10, 100 Mbit/s
WAN connection	Ethernet (RJ-45)
Headphone connectivity	3.5 mm
Ethernet LAN (RJ-45) ports	2
Package depth	58 mm
Package width	147 mm
Package height	114 mm
Operating temperature (T-T)	-30 - 60 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting type	Desktop/Wall mounting
Product color	Black
LED indicators	Network, Status
Enclosure material	Aluminum
Voice codecs	G.711a, G.711u, G.722, G.729A, G.729B, OPUS

Weight and Dimensions

Depth	28 mm
Width	113 mm
Height	83 mm