Fanvil PA2S User Manual

17
7 Basic Function
7.1 Making Calls
After setting the function key to Speed dial and setting the number, press the function key to
immediately call out the set number, as shown below:
Picture 6- Function Setting
See detailed configuration instructions 9.26 Function Key
7.2 Answering Calls
After setting up the automatic answer and setting up the automatic answer time, it will hear the
ringing bell within the set time and automatically answer the call after timeout. Cancel automatic
answering. When a call comes in, you will hear the ringing bell and will not answer the phone
over time.
7.3 End of the Call
You can hang up the call through the Release key (you can set the function key as the Release
key) or turn on the speed dial button to hang up the call. See detailed configuration instructions
9.26 Function Key.
7.4 Auto Answer
The user can turn off the auto-answer function (enabled by default) on the device webpage, and

Fanvil PA2S Specifications

General

Supported protocols	SIP v1 (RFC2543), v2 (RFC3261) over UDP/TCP/TLS RTP/RTCP/SRTP STUN DHCP IPv6 PPPoE L2TP OpenVPN SNTP FTP/TFTP HTTP/HTTPS TR-069
Full duplex	Yes
VPN support	L2TP / OpenVPN
Ethernet LAN data rates	10, 100 Mbit/s
WAN connection	Ethernet (RJ-45)
Headphone connectivity	3.5 mm
Ethernet LAN (RJ-45) ports	2
Package depth	58 mm
Package width	147 mm
Package height	114 mm
Operating temperature (T-T)	-30 - 60 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting type	Desktop/Wall mounting
Product color	Black
LED indicators	Network, Status
Enclosure material	Aluminum
Voice codecs	G.711a, G.711u, G.722, G.729A, G.729B, OPUS

Weight and Dimensions

Depth	28 mm
Width	113 mm
Height	83 mm