Fanvil X4G Configuration Guide

Home
PBXware
SERVERware
TELCOware
SIPmon
SIPProt
Desktop & Mobile
BRM
UADs
Appliances
EOL
From Bicom Systems Wiki
Contents
1 Introduction
■
2 Video Tutorial
■
3 Requirements
■
3.1 Identifying phone model
■
3.2 Phone firmware
■
3.3 DHCP server
■
3.4 PBXware version
■
4 Installation
■
4.1 Power adapter
■
4.2 Power over Ethernet (PoE)
■
4.3 Find the phone IP address
■
4.4 Reset to factory settings
■
5 Registering phone
■
5.1 Manual configuration
■
5.2 Auto Provisioning
■
6 Configure BLF
■
6.1 Extension Settings
■
6.2 Phone Settings
■
Introduction

Fanvil X4G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Wall mountable	Yes
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Speakerphone	-
Voice codecs	AMR, AMR-WB, G.711a, G.711u, G.722, G.726, G.729ab, iLBC
Certification	CE, FCC
Lines quantity	4 lines
Call log entries	600
Phonebook capacity	500 entries
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Display diagonal	2.8 \
Display resolution	320 x 240 pixels
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Volume control	Digital
Keypad number of keys	38
Number of function keys	6
Power consumption (typical)	2.5 W
RJ-9 ports quantity	2
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	DHCP, PPPoE, L2TP, OpenVPN, SIP2.0 UDP/TCP/TLS, RTP/RTCP/SRTP, STUN, DHCP, PPPoE, 802.1x, L2TP, SNTP, FTP/TFTP, HTTP/HTTPS, TR069

Weight and Dimensions

Depth	169 mm
Width	196 mm
Height	173 mm
Package width	270 mm
Package height	65 mm