139
(MT11 - Gb2012)
3
"
16
/
15
100
1
"
16
/
11
42.5
5
"
16
/
13
148
4
"
16
/
3
106
1
"
16
/
13
46
5
"
16
/
15
151
4+1
INTERCOMS *
7+1
VIDEOINTERCOMS
ANTILOCALE
UP 100. Amplified push-button panel with 1 call button.
Be used in all 4+1 intercom and intercommunicating systems.
Complete with electric door speaker amplifier in the two channels,
volume control of the receiving channel, front panel in anodized alu-
minium with call button. Wall-mountable with expansion plugs.
UP 200. Amplified push-button panel with 2 call buttons.
External volume adjustment
Surface mounted version
Flush mounted version
External volume adjustment
UP 11. Amplified push-button panel with 1 call button.
Be used in all 4+1 intercom and intercommunicating systems.
Complete with electric door speaker amplifier in the two channels,
volume control of the receiving channel, front panel in anodized alu-
minium with call button.
To install it you must:
- fix the back box to the wall;
- install the speaker unit;
- make the connections;
- screw the front panel onto the back box.
UP 12. Amplified push-button panel with 2 call buttons.
Terminals
- ground
13Vac-70mA voltage input
1 audio receiver
2 audio transmitter
Wires in electronic call systems
C the yellow wire must not be used; it
is recommended to insulate or cut
it.
PUSH-BUTTONS UP series
U
P
EXTERNAL DOOR STATIONS UP series
To Next Page
Loading...
