Fasep 2000 srl Rev. 1.8
Balatron 222/212: User’s Manual 23 January 2020
i
FIG. 43: Balatron 212/222 measures
APPENDIX
A: Technical Data
Absorbed power 60W
Speed Balancing 98RPM
Measuring time 4-15 seconds
Precision ±1grs (±1/28 ounce)
Wheel dimensions Rim Diameter from 8" (200mm) to 26" (650mm)
Wheel Diameter (m ax, with cover) 34" (850mm)
Rim Width (max, with cover) 16" (410mm)
Wheel Weight (max) 70Kg (155Lbs)
Wheel balancer dimensions
B222 B212
L (mm)
1100 1030
L1 (mm)
500 500
L2 (mm)
1150 1080
P (mm)
510 430
P1 (mm)
550 550
P2 (mm)
1250 1250
H (mm)
990 940
H1 (mm)
1400 1400
Peso (kg)
72 70
B: Environmental Data, Safety Features and Requirements
Environmental Data
[Operating conditions]
This unit is designed for indoor use only.
Temperature: 0 to 45°C Relative Humidity: 5 to 80% a 40°
[Storage conditions]
Package is designed for indoor storage only.
Temperature: -25° to 70°C Relative humidity: 5 at 95% to40°C
Safety Features
1. The Balance Weights Holder may be removed for servicing. It is secured to the machine body through screws so that only
voluntarily it may be removed. Removal of this protection is therefore restricted to Authorized Service Engineers.
2. The Control Panel may be removed for servicing. It is secured to the machine body through screws so that only voluntarily
it may be removed. Removal of this protection is therefore restricted to Authorized Service Engineers.
WARNING FASEP 2000 srl shall not be responsible for any inconvenience, breakdown, accidents caused
directly or indirectly by unauthorized service. Service to any parts by unauthorized engineers will void
warranty and will any right of the owner of the unit.
NOTE As this unit runs at a speed below 100rpm, a safety cover is not required. However a safety cover
is recommended when balancing wheels with diameter bigger then 20".
! CAUTION The safety cover is anyway required when using the motorcycle adapter.
To Next Page
Loading...
