Fasep BALATRON B110 - User Manual

Fasep 2000 srl Rev. 1.3
Balatron B110, B210: User’s Manual 15 July 2013
For any information, please contact: www.fasep.it
e-mail: info@fasep.it
FASEP 2000 srl
Via Faentina 96
50032 Ronta (Fi) Italy
Tel. #39 055 840 3126
Fax #39 055 840 3354
i
FIG. 1 Balatron 210
FIG. 2 Balatron 110
BALATRON B110, B210
USER’S MANUAL

Summary

Installation Guide

Unit Handling and Setup

Electrical Connection Guidelines

Procedures and precautions for connecting the unit to the power supply.

Calibration Procedures

Performing Wheel Balancer Calibration

Step-by-step guide for calibrating the wheel balancer for accurate measurements.

Checking Wheel Balancer Calibration

Procedure to verify the accuracy and integrity of the balancer's calibration.

ALU-SE Calibration Process

Specific steps for performing the ALU-SE calibration for certain balancing modes.

Measuring and Correcting Unbalance

Inputting Rim Dimensions

ALU Mode Rim Input

Detecting, Correcting Unbalance, and Applying Weights

Process for identifying unbalance and applying correction weights using indicators.

Wheel Unbalance Optimization (Option)

Optimization Procedure Steps

Steps to optimize wheel unbalance by marking the rim and tire positions.

General Safety Guidelines

Pre-operation and Servicing Safety

Operational Safety Rules

Error and Malfunction Codes

Troubleshooting Computer Error Codes

Lists and explains error codes recognized by the computer for troubleshooting.

Fasep BALATRON B110 Specifications

General

Balancing accuracy	± 1 g
Max. wheel weight	65 kg
Rim diameter	10" to 24" (254-610 mm)
Rim width	1.5" to 20" (38-508 mm)
Accuracy	1 g