Fasep BALATRON B110 - ALU-SE Calibration Process

Fasep 2000 srl Rev. 1.3
Balatron B110, B210: User’s Manual 15 July 2013
4-3
4.3 ALU-SE Calibration
Put the rod in 0 position (Fig. 15)
Put the rod in internal side of flange
(Fig.16)
Put the rod in the internal side of the
rim (Fig.17)
Select the wheel diameter
Press <MODE/ESC> to return to
normal balancing mode.
FIG. 15
FIG. 16
FIG. 17