Fasep 2000 srl Rev. 1.3
Balatron B110, B210: User’s Manual 15 July 2013
1-1
1 PRESENTATION
1.0 Intended Use
This unit is designed to measure and correct static and dynamic unbalance of vehicle wheel, the dimension and weight of
which are within the working range of the machine (see “Technical Data”appendix for reference)
This unit is meant for a professional use. Operator shall be properly trained before use. Training Course is not included in
the price of the unit and must be purchased separately.
This unit is designed for indoor use only ( see “Environmental Data”appendix for reference).
! CAUTION This unit is designed to spin vehicle wheels only, within the range of dimensions and weight approved
(see “Technical Data”appendix for reference). Special adaptors suit this purpose. Do not attempt to use
the machine to spin anything else. Unproper locking may cause the part being spun to be ejected,
causing damage to the unit itself, the operator or anything in the in the neighborhood.
1.1 Definitions
1. 3D console
2. Nameplate label
3. Flange holders
4. Weights and tolls compartments
5. Foot-pedal brake
To Next Page
Loading...
