FASTRON. VC-210 - Product and Alarm Name Library Management; Modifying and Adding Names; Saving Library Changes and Exiting

Process Controllers
FAST Lit. Part No. 229-51311 Rev. E (MANAGER) 24SEP2010 Page 12
 2005-2010 Food Automation – Service Techniques, Inc. All Rights Reserved
This document contains confidential information. The dissemination, publication,
copying, or duplication of this document without prior written authorization is
strictly prohibited.
4a
MODIFY or ADD an Existing
Product or Alarm Name
OR
Prod Name Lib
xxxxxxx
OR
x
Alarm Name Lib
xxxx
• Start spelling the name
(predictive method) using keys 1-
10, OR
• Use the UP and DOWN arrow
keys to scroll through the library
(traditional method).
4b
• Once name is located, press the
SCAN key to toggle from
predictive text input to traditional
text input.
4c
OR
• Use the LEFT and RIGHT arrow
keys to move the cursor.
• Press “Exit Fill” to toggle between
Upper and Lower case.
• “Exit Cool” can be used to clear
the existing product name.
• Press the “P” key to complete.
4d
OR
SAVE LIBRARY
MODIFY, ADD, CANCEL
• Press the LEFT or RIGHT arrow
keys to select “Modify” or “Add.”
• Press the “P” key.
NOTE: Selecting “Cancel” allows
you to exit without making any
changes.
4e
Exit Program Mode
OR
EXIT
• Press the UP or DOWN arrow
keys to scroll to “Exit.”