12
FAVERO Electronics - 0259-0902A Assioma user manual _Rev12 - EN-IT-DE
ENGLISH
18. LEDs behavior
Fast and continuous blinking for 3
seconds
• indicates that Assioma is being switched
on.
Short blinking every 3 seconds
• indicates that Assioma is switched on.
Fixed light
• indicates that the battery is being
charged.
Short blinking every 0.5 seconds
• indicates that the battery charging has
been completed.
19. Inspection and maintenance
Carefully inspect the product before starting a cycling session; check all parts
for damage, cracks, loose parts and signs of wear. Do not use the product unless
you have carefully checked and replaced any worn or damaged parts.
If the product is not in perfect conditions, its use may be the cause of accidents,
damage to things and/or injuries to people, as well as the cause of early
degradation of the product and its performance.
Clean Assioma with a damp cloth.
Do not use aggressive chemicals such as: gasoline, gas oil and petrol by-products in
general, alcohol, industrial or all-purpose degreasers, etc. Do not use high pressure
cleaners.
Periodically check that the end cap (Chap. 25) is correctly tightened. Before each
cycling session, check that the pedals and cleats are properly working. If the
cleats are worn out, they may cause accidents.
Do not attempt to open or disassemble the sensor as you may damage it and
invalidate the warranty. Assistance must be carried out only by a specialized
technician, authorized by Favero Electronics.
20. Spare parts
For more information on spare parts, visit the website cycling.favero.com.
To Next Page
Loading...
Need help?
General
