37X INSTALLATION & OPERATION MANUAL
372/373 MODEL
26
10.10 Settings Menu
NF*
The SETTINGS menu (Figure 10.13) provides dispenser information and access to some settings that are adjustable:
SERIAL#: Provides the serial number of the dispenser. This is used for BevTrak
TM
reporting.
BARRELS: Provides the number of barrels for the dispenser.
DISPLAY UNITS: Set the units of measurement to English or SI.
ALARM: Indicates whether the dispenser is set up with an audible alarm when out of product.
There are also two sub-menus that affect the quality of the drink (Figures 10.14 and 10.15):
EXPANSION ADJUSTMENT: The amount of carbonation in the drink can be adjusted in this menu (Figure 10.13).
The adjustment ranges from “MAX CO2” (high levels of carbonation) to an uncarbonated drink. Select the barrel
number and adjust the bar graph up or down.
Note: Approximately ten 16 oz drinks will need to be dispensed before the product in the barrel has reconditioned
to the new settings.
Figure 10.13
Figure 10.14
* Refer to Appendices for additional information on Nitrofub configuration.
To Next Page
Loading...
