37X INSTALLATION & OPERATION MANUAL
372/373 MODELS
46
Error #450: Gas #1 - High Regulated CO PSI
The regulated CO pressure is above 70 PSI (483 kPa) for barrels 1 and 2 (standard 372 multi-gas) and barrel 1 (372 multi-
flavor, universal gas).
Error #460: Gas #1 - Low Regulated N PSI
The regulated N pressure dropped below 50 PSI (345 kPa) for barrels 1 and 2 (standard 372 multi-gas) and barrel 1 (372
multi-flavor, universal gas).
Error #470: Gas #1 - High Regulated N PSI
The regulated N pressure is above 70 PSI (483 kPa) for barrels 1 and 2 (standard 372 multi-gas) and barrel 1 (372 multi-
flavor, universal gas).
Error #480: Gas #2 - Low Regulated CO PSI
The regulated CO pressure dropped below 50 PSI (345 kPa) for barrel 2.
Error #490: Gas #2 - High Regulated CO PSI
The regulated CO pressure is above 70 PSI (483 kPa) for barrel 2.
Error #1000: Gas #2 - Low Regulated N PSI
The regulated N pressure dropped below 50 PSI (345 kPa) for barrel 2.
Error #1010: Gas #2 - High Regulated N PSI
The regulated N pressure is above 70 PSI (483 kPa) for barrel 2.
1 Check the “Gas 1” regulator on the header tray and ensure it is set to 60 PSI (414 kPa).
1 Ensure the N supply is not low.
2 Check the “Gas 1” regulator on the header tray and ensure it is set to 60 PSI (414 kPa).
1 Check the “Gas 1” regulator on the header tray and ensure it is set to 60 PSI (414 kPa).
1 Ensure the CO supply is not low.
2 Check the “Gas 2” regulator on the header tray and ensure it is set to 60 PSI (414 kPa).
1 Check the “Gas 2” regulator on the header tray and ensure it is set to 60 PSI (414 kPa).
1 Ensure the N supply is not low.
2 Check the “Gas 2” regulator on the header tray and ensure it is set to 60 PSI (414 kPa).
1 Check the “Gas 2” regulator on the header tray and ensure it is set to 60 PSI (414 kPa).