FDP CFN - PART 10 INSTALLER MENU; 10.1 LEVEL 1, 10.2 LEVEL 2, AND 10.3 LEVEL 3

Page 29 of 35
Rev. 1.03
In this chapter are viewed the control panel menu structure. They are divided for access levels.
To access at levels to do reference at the chapter 5.1.
10.1 LEVEL 1
• Silent mode of 1
st
level (§ 6.5).
10.2 LEVEL 2
• Silent mode of 2
nd
level (§ 5.1.3).
• Alarm/fault reset (§ 0).
• Leds/buzzer test (§ 3.6.1).
• Out of service of zone (§ 7.1).
• Siren outputs activation (§ 8.1).
10.3 LEVEL 3
• Default setting restoration (§ 6.8).
• Zone test (§ 7.2).
• Zone alarm/prealarm (§ 7.3) and programming “Automatic activation” of the <Out1>
outputs (§ 7.3.1).
• Siren outputs delay (§ 8.3).
PART 10
INSTALLER MENU